MEGAN 4pc Front Tension Rod + Rear Trailing Arm MR2 MR-2 93-95 *fit Jan 92 after

BRAND NEW MEGAN RACING - REAR TRAILING ARM + FRONT TENSION ROD (MRS-TY-1022 / Old# 6584 + MRS-TY-1080 / Old# 6574)

Application:
TOYOTA MR2 93-95 (SW20/SW21)
*January 1992 Production date (Model Year 1993-99)

The MR-S is Toyota's most recent version of their popular Mid-Ship platform that has been the favorite of many track-minded drivers for almost two decades. Although difficult to master, the MR-Platform is considered perhaps the strongest platform as the car has the ability to be a perfect 50:50 balance of weight between the wheels.

The MR-Platform is difficult to master due to the sensitivity of weight-transfer which can cause the car to seem unstable; because of this fact the alignment is absolutely CRUCIAL in this vehicle and can greatly effect the stability and handling.

Megan Racing Inc. has developed reinforced and adjustable control arms to accommodate the needs of the aggressive and performance oriented tuner. Being constructed of a Lightweight Steel-Alloy which is able to withstand the stresses of extreme competition, these arms are powder-coated with a 3-Stage process to ensure durability and protection against the elements.

These Traction rods allow for fine-tuned adjustments to the rear suspension geometry. By changing the length of the traction rod you change the position and pitch of which the suspension rotates upon and you change the amount of "Anti-Squat" of the rear. Although the adjustment is minimal, it can change the behavior or the vehicle during weight transfer.

Measurements:
Minimum Arm Length: 16.00"
Maximum Arm Length: 18.00"
(max arm length measured with 5/8" thread engagement)
Rod End Width: 2 1/8"
Rod End ID: 1/2"

- Constructed of Steel Alloy for Lightweight yet Durable performance.
- Teflon-Injected Heim Joints for a more direct feel and driving experience.
- Easy to access turnbuckle-style adjustment.
- Can be adjusted without removing from the vehicle.

MSRP: $187.00

These front pillow tension rods available for the SW20 chassis are an excellent upgrade. With it s adjust ability you are able to carefully tune the vehicle s front-Caster to your specifications. The pillow ball ends replace the stock rubber bushings on the chassis and offers you a more direct and predictable feel that you require in competition. The adjust ability and feel is also backed with the comfort that your stock thin tension rods are now replaced with thick steel constructed arms that can withstand the stresses of competition.

Measurements:
Minimum Arm Length: 14 3/4"
Maximum Arm Length: 16 7/16"
(max length measured center to center hole with 5/8" thread engagement between inner and outer ends)
Rod End Width: 2 3/4"
Rod End ID: 9/16"
Threaded OD: 5/8"

- Allows for Caster adjustment.
- Teflon-Injected Pillow ball Ends remove any play in suspension.
- Replaces soft worn-out bushings in the chassis that are over a decade old.

MSRP: $258.00