It appears that your cart is currently empty
BRAND NEW MEGAN RACING - REAR TOE CONTROL + TRACTION ARM (LX-0580 LX-0570/ Old# 6478 + 6477)
FIT: LEXUS SC300/400 92-98 MODEL
Car alignment is absolutely crucial when modifying your car. Alignment can effect every aspect of your driving experience, from straight line stability, understeer, oversteer, acceleration, braking and tire wear. Although stock components allow slight alignments from the stock suspension settings, they often are not able to properly align the car after the suspension has been modified. From the factory, most cars are set to have understeer and for optimum tire wear at stock height; understeer is often undesired from a performance standpoint and almost all performance driven applications are lowered.
It is within this understanding that Megan Racing has unveiled our line of reinforced suspension arms that offer the strength and adjustment that any comptition vehicle will ever need. Constructed of high-strength steel alloys that offer durability, strength and yet remain light-weight, these control arms have been track tested for months in road race, autocross and drift events to assure quality and performance.
These Toe-Control arms allow for fine-tuned adjustments to the rear toe in/out setting of the vehicle. Toe is crucial for the straight line stability and behavior of a car and is said to have more of an effect than the front toe.
These Traction rods also allow for fine-tuned adjustments to the rear suspension geometry. By changing the length of the traction rod you change the position and pitch of which the suspension rotates upon and you change the amount of "Anti-Squat" of the rear. Although the adjustment is minimal, it can change the behavior or the vehicle during weight transfer.
- Constructed of Steel Alloy for Lightweight yet Durable performance.
- Hard Rubber bushings for a more direct feel and driving experience.
- Easy to access turnbuckle-style adjustment.
- Can be adjusted without removing from the vehicle.
- 11/16" thread width / minimum thread engagement
- 9/16" ID of rod end
- 1 3/4" rod end width
- 9/16" ID of fork end
- 1 5/8" fork end width
- Minimum Arm Length: 15 7/8"
- Maximum Arm Length: 17 1/2"
(arm length measured with minimum thread engagement of 11/16")