MEGAN 4pc Rear Camber + Toe Control Arm BMW E90 E92 E93 06-11 E82 E88 08-13 RWD
MEGAN 4pc Rear Camber + Toe Control Arm BMW E90 E92 E93 06-11 E82 E88 08-13 RWD
SKU:MRS-BM-0210_MRS-BM-0270
Out of stock
BRAND NEW MEGAN RACING - REAR CAMBER + TOE ARM (BM-0210 BM-0270/ Old# 6831 6832)
FIT: BMW E90/92/E93 06-11, E82/88 08-13 (RWD) MODEL
Note: will not fit AWD model
Wheel alignment is absolutely crucial when modifying your car. Alignment can effect every aspect of your driving experience, from straight line stability, under-steer, over-steer, acceleration, braking and tire wear. Although stock components allow slight alignments from the stock suspension settings, they often are not able to properly align the car after the suspension has been modified. From the factory, most cars are set to have under-steer and for optimum tire wear at stock height; under-steer is often undesired from a performance standpoint but is always dependent on driver style, therefore the adjust-ability of the alignment of a vehicle is critical when tuning for speed. The clock does not lie and having the vehicle alignment can make seconds of a difference.
Megan Racing Inc. has developed reinforced and adjustable control arms to accommodate the needs of the aggressive and performance oriented tuner. Being constructed of a Lightweight Steel-Alloy which is able to withstand the stresses of extreme competition, these arms are powder-coated with a 3-Stage process to ensure durability and protection against the elements.
Megan Racing has now developed camber arms for the B.M.W crowd that will help attain a higher level of control and performance. Constructed of a Reinforced Rubber Bushing , these control arms remain light weight while being able to take the punishment of competition and extreme conditions. A 3-Stage powder coating process the control arms will easily combat the elements for years of performance.
MEASUREMENTS:
Rod End ID: 15/32"
Minimum Arm Length: 9 7/8"
Maximum Arm Length: 11 13/16"
Max/Min measurements based on center-hole to center-hole dimension.
- Made with high-strength and anti-cranking rubber material
- Rubber viscosity is around 2000KGS
- Direct replacement/ no modifications needed
MSRP: $299.00
These Toe-Control arms allow for fine-tuned adjustments to the rear toe in/out setting of the vehicle. Toe is crucial for the straight line stability and behavior of a car and is said to have more of an effect than the front toe.
MEASUREMENTS:
- Maximum Arm Length: 17 7/16"
- Minimum Arm Length: 15 13/16"
- Rod End Width: 1 7/8"
- Rod End ID: 15/32"
MSRP: $250.00