It appears that your cart is currently empty
BRAND NEW MEGAN RACING - REAR CAMBER & TRACTION ARM SET (NS-0480 NS-0410/ Old# 6856 6855)
FIT: NISSAN 370Z (Z34) 09-14, G35/37 Coupe 08-13, G35/37 Sedan 07-13 (RWD) MODEL
**Will not fit AWD Model**
Those who seek the most from their car know that in the rigors of competition you need to extract every ounce of performance from your machine. You need the capability to have every degree of adjustment above and beyond that of a street driven vehicle. You need the strength to withstand the stresses and strains of hard corners, a rough course and brutal weight transfer and chassis flex.
It s within this understanding that Megan Racing has unveiled our line of reinforced suspension arms that offer the strength and adjustment that any competition vehicle will ever need. Constructed of high-strength steel alloys that offer durability, strength and yet remain light-weight, these control arms have been track tested for months in road race, autocross and drift events to assure quality and performance.
These rear traction rods available for the 370Z chassis are an excellent upgrade. With it s adjustability you are able to carefully tune the vehicle s rear suspension to your specifications. The pillow ball ends replace the stock rubber bushings on the chassis and offers you a more direct and predictable feel that you require in competition. The adjustability and feel is also backed with the comfort that your stock thin tension rods are now replaced with thick steel constructed arms that can withstand the stresses of competition.
These Traction rods also allow for fine-tuned adjustments to the rear suspension geometry. By changing the length of the traction rod you change the position and pitch of which the suspension rotates upon and you change the amount of "Anti-Squat" of the rear. Although the adjustment is minimal, it can change the behavior or the vehicle during weight transfer.
Traction rods: Determine caster (or thrust angle) on the rear suspension. As with the front, this helps determine the camber curve of the rear suspension.
Tip: On an aggressively lowered car, these should be lengthened (to about 8.5in) for a less aggressive toe curve and less bumpsteer.
- Adjustable lengths to tune Rear Suspension and Reduce Bump-Steer.
- Pillow ball bearing replaces OEM rubber bushing.
- Durable Steel construction to withstand high-stresses of competition.
- Powder coated with brilliant blue finish for years of performance.
The 370Zis sensitive and "picky" when it comes to it s alignment characteristics. When you lower the vehicle, the toe and camber in the rear is drastically affected. We have developed Rear Camber Arms to help alleviate this issue. Allowing a wider range of adjustment and an easier way to access the adjustment points makes these arms a must for any driver who has lowered their 370Z and is looking to properly tune their machine for performance and help against premature tire-wear. The Powder coated Steel Construction also adds for durability and wears against demanding competitive conditions and rough driving surfaces as well.
-Allows adjustment of Rear Camber.
-Wider range of adjustment than stock.
-Powder coated for durability against the elements.
-High Strength steel construction protects against stresses of competition.