It appears that your cart is currently empty
BRAND NEW MEGAN RACING - REAR LOWER CONTROL ARM + TRAILING CONTROL ARM (TY-1021 + TY-1020)
FIT: TOYOTA MR2 SPYDER 00-05 MODEL
These lower arms replace the factory units to give you more adjust ability in camber. The suspension geometry on the rear of the MR-S chassis usually causes too much negative camber than what is needed when the ride height is lowered. These arms offer the camber adjust ability to get the camber specifications within tolerable numbers. The pillow ball helps with rigidity and reduce any play found in rubber bushings. These control arms are extremely strong for any extreme driving and powder coated with Megan Racing colors.
Max/Min Lengths (hole center to hole center):
Minimum: 13 27/32"
Maximum: 15 5/8"
When lengthening these rear lower arms, please keep in mind that the minimal amount of thread engagement should meet or exceed the diameter size of the bolt thread itself.
These trailing arms help to benefit the vehicle in two ways. The first and most obvious way is by eliminating the soft-rubber bushings that allow unpredictable play and movement in your suspension. This allows the driver to get a more direct feel for the car and a more predictable reaction which gives the driver more confidence.
The second way is by allowing fine-tuned adjustments to the rear suspension geometry. By changing the length of the traction rod you change the position and pitch of which the suspension rotates upon and you change the amount of "Anti-Squat" of the rear. Although the adjustment is minimal, it can change the behavior or the vehicle during weight transfer.