MEGAN 6pc Rear Camber + Toe + Lower Control Arms Accord 90-97 CB7 CD5 CD7

BRAND NEW MEGAN RACING - Rear Camber + Toe + Lower Control Arm (HA-0170 HA-0120 HA-0116)

FIT: HONDA ACCORD 90-97

Wheel alignment is absolutely crucial when modifying your car. Alignment can effect every aspect of your driving experience, from straight line stability, under-steer, over-steer, acceleration, braking and tire wear. Although stock components allow slight alignments from the stock suspension settings, they often are not able to properly align the car after the suspension has been modified. From the factory, most cars are set to have under-steer and for optimum tire wear at stock height; under-steer is often undesired from a performance standpoint but is always dependent on driver style, therefore the adjust-ability of the alignment of a vehicle is critical when tuning for speed. The clock does not lie and having the vehicle alignment can make seconds of a difference.

Megan Racing Inc. has developed reinforced and adjustable control arms to accommodate the needs of the aggressive and performance oriented tuner. Being constructed of a Lightweight Steel-Alloy which is able to withstand the stresses of extreme competition, these arms are powder-coated with a 3-Stage process to ensure durability and protection against the elements.

These rear Lower-Rear Arms are adjustable to fine tune your cars handling in the rear. When lowering a car, these will eliminate premature tire wear caused by the rear wheels riding upon the inside tread only. Combine with Rear Toe Arms and Rear-Rear Control Arms for the ultimate in adjust-ability.

NOTE: For vehicles lowered up to 1.5" -- straight arm design not applicable to vehicles lowered more than 1.5"!

- Constructed of Steel Alloy for Lightweight yet Durable performance.
- Hard Rubber bushings for a more direct feel and driving experience.
- Easy to access turnbuckle-style adjustment.
- Can be adjusted without removing from the vehicle.
- Eliminates Premature Tire Wear while improving handling and stability.

MSRP: $125.00

These Toe-Control arms allow for fine-tuned adjustments to the rear toe in/out setting of the vehicle. Toe is crucial for the straight line stability and behavior of a car and is said to have more of an effect than the front toe. A little bit of toe-out in the rear will allow the car to turn easier which can reduce the tendency of initial under-steer which most FWD cars are plagued with. A little bit of toe-in on the rear will give the car straight-line stability which most city drivers prefer.

Measurements:
Eyelet Inner Diameter: 1/2" ID
Eyelet Width: 1 1/2"
Minimum Arm Length: 10 1/4"
Maximum Arm Length: 11 3/4" (with safe amount of thread engagement)

- Constructed of Steel Alloy for Lightweight yet Durable performance.
- Hard Rubber bushings for a more direct feel and driving experience.
- Easy to access turnbuckle-style adjustment.
- Can be adjusted without removing from the vehicle.
- Combine with Rear-Lower Camber Arms (6361-L) for the best combination of control and adjustablility.

MSRP: $112.50

These rear Lower-Rear Arms are adjustable to fine tune your cars handling in the rear. When lowering a car, these will eliminate premature tire wear caused by the rear wheels riding upon the inside tread only. However, you will also slightly effect Toe and your track width of the vehicle.

MEASUREMENTS:
- Minimum Arm Length: 15 5/8"
- Maximum* Arm Length: 16 5/8"
*5/8" minimum thread engagement

- Constructed of Steel Alloy for Lightweight yet Durable performance.
- Hard Rubber bushings for a more direct feel and driving experience.
- Easy to access turnbuckle-style adjustment.
- Can be adjusted without removing from the vehicle.
- Eliminates Premature Tire Wear while improving handling and stability.
- Combine with Rear-Front Toe Arms (6361-S) for the best combination of control and adjustablility.

MSRP: $112.50